Hydrapower Logo
PRODUCTS >>

shim  

Material Handling - Corrugated Plate Forming System

CORRUGATED PLATE FORMING SYSTEM
OPERATING SEQUENCE IN MANUAL MODE:

  1. Set rear stops at maximum.
  2. Load plate on handling system and send it to the rear.
  3. Set first bend position on rear pusher.
  4. Make first bend.
  5. Press the UP button to raise the system.
  6. Set top limit switch to suit height.
  7. Set next bend position on rear pusher.
  8. Press DOWN button and lower the plate to die height.
  9. Make next bend.
  10. Press UP button.
  11. Set next bend position.

REPEAT STROKES THEN UNLOAD PLATE AT FRONT OF MACHINE.

In CNC mode the X dimensions would be loaded in the control. At each stroke the plate would be repositioned.

 


FEEDER FOR CORRUGATED PLATES

SPECIFICATIONS

CONTROLS:    Manual or optional CNC
Manual operation is by push button with limit switches setting heights and DRO for position of X on both units.

CNC: Can be interfaced with an existing control for the X position while R is by limit switch. R always equals die depth plus clearance.

Load capacity for each unit 4000 Kg /8800 lb
Travel X  distance 1700 mm/ 66”
Travel X  speed 5400 mm/ min=18 FPM
Motor size 1.1 Kw/ 1.5HP
Travel R  distance 1100 mm /43”
Travel R speed 1500 mm/min = 60IPM
Motor size 2.2 Kw = 3HP 
Weight  per unit 600 Kg/ 1300 lb

 

© 2002+, Hydrapower International, Inc. All Rights Reserved.
Information on these pages is subject to change without notice.

Florida Custom Web Development - EyeMagination